Case Study NHS

This project required us to do the internal signage for two separate doctors’ surgeries, both with different signage requirements and design.

It included internal signage using 3mm foam to hang from the ceilings or to be directly onto the walls. Slat signs for doctor names and directories, plus a few external signs on aluminium composite.

The difficulty with this project was that the customer needed some slat inserts to match their existing slat sliders. If you haven’t investigated these little buggers before, there are a lot of variations in size, colour and type so matching them was a bit of a task.

However, thanks to the client being incredibly helpful and understanding we managed to get the correct fit. This shows how diverse the slat sliders can be as we can cover them in cut vinyl to match the colours you require. Sliders and slats offer a very professional finish that are easily up dated, so if you require new names to be put on them it’s an easy change over that won’t require your purchasing it all again!

Customer Testimonial

Jo Doyle, NHS Horsforth Medical Practice

‘I used Pennine Signs to renew all internal signage at a Medical Practice. They have been nothing short of fantastic throughout the whole process from initial enquiry to overall installation.

The design team have been my main point of contact with Carrie-Ann who managed the whole order. She listened to all my requirements, a representative was sent to measure everything up and installation was a breeze. The signs are very high quality and best of all, they are bespoke to our Practice.’

Job Information

Materials Used:

– Foamex 3mm
– Exterior grade cut vinyl from our stock colours
– Slat signs
– Slat sliders and inserts
– Aluminium composite

Start Your New Signage Design

To get going with your design there are just a few things we need to know, Don’t worry if you don’t know all the answers to the below, just give us a call to discuss your options on 01422 884065 or send us an email to get started.

– Size
– Supply only or Supply and Fit
– Location if Supply and fit
– What is it being fitted to
– Design concept/ purpose
– Specific CMYK colour code if applicable
– General colours you would like to use
– Do you have a logo? If so send across to us
– If you don’t have a logo, we can create one for you

We have a few different options for sign media:

Cut Vinyl – Our cut vinyl is backed with a permanent self adhesive that allows the product to be fitted to internal walls,
external and internal signs, glass and vehicles. It is an exterior grade that is made to last and comes in a variety of
colours.

Printed Vinyl – Our printed vinyl is backed with a permanent self adhesive that allows the product to be fitted to internal
walls, external and internal signs, glass and vehicles. It is an exterior grade vinyl which can be printed to, making your
designs come to life.

Wrap Vinyl – Wrap vinyl is designed for, and used most commonly, to be fitted into recessed areas and follow the contours of a van to give a full, professional finish without any noticeable breaks in the print. It can also be used to wrap certain 2D and 3D objects.

Do you have a logo? If so send it across to hello@penninesigns.co.uk in a high resolution PDF format to see if we can use it on your design.
Once we know the vehicle information we can use templates to create the proof, this will show you what the design will look like on a template of your vehicle (templates may not be available for rare or brand new models, in this case we will use images of your vehicle itself.