We started this job with a brief, a logo and a café under construction.

We began discussions in November 2017 and was finally fitted and finished in December 2018, so it was a long process, but we were happy to be along for the ride.

The customer needed a few different signage solutions including a projecting sign, a coffee stencil and an illuminated external sign. Due to the café being refurbished in stages and a limited budget, the job took a while to go from initial enquiry to completion.

We came up with a couple of ideas for the external signage, all with different budgets to give the customer a full understanding of what they could achieve. They decided to move forward with 3D illuminated Letters, fitted with back trays to produce a Halo effect. To do this we used white 3D letters with a clear acrylic to the back, the LED’s were housed inside the 3D letters and when switched on would reflect through the back clear acrylic panel, shining the light onto the wooden backboard.

This will then give it a halo effect with the light shining behind the letters around the edges… The LED’s were connected to a junction box within the café which was installed by a qualified electrician.

The LED’s are evenly distributed around the inside of the letters in our workshop prior to fitting, this means that when we get onsite all we need to do it fit the sign itself and then connect the LED’s straight to the junction box.

The result was a clean cut illuminated sign that will certainly get everyone’s attention.

– Size
– Supply only or Supply and Fit
– Location if Supply and fit
– What is it being fitted to
– Design concept/ purpose
– Specific CMYK colour code if applicable
– General colours you would like to use
– Do you have a logo? If so send across to us
– If you don’t have a logo, we can create one for you

We have a few different options for sign media:
Cut Vinyl – Our cut vinyl is backed with a permanent self adhesive that allows the product to be fitted to internal walls,
external and internal signs, glass and vehicles. It is an exterior grade that is made to last and comes in a variety of
colours.
Printed Vinyl – Our printed vinyl is backed with a permanent self adhesive that allows the product to be fitted to internal
walls, external and internal signs, glass and vehicles. It is an exterior grade vinyl which can be printed to, making your
designs come to life.
Wrap Vinyl – Wrap vinyl is designed for, and used most commonly, to be fitted into recessed areas and follow the
contours of a van to give a full, professional finish without any noticeable breaks in the print. It can also be used to wrap
certain 2D and 3D objects.

Do you have a logo? If so send it across to hello@penninesigns.co.uk in a high resolution PDF format to see if we can use it on your design.
Once we know the vehicle information we can use templates to create the proof, this will show you what the design will look like on a template of your vehicle (templates may not be available for rare or brand new models, in this case we will use images of your vehicle itself.